Project3-Pinhole camera

Here are the materials you'll need:

-Pringles can -push pin
-aluminum foil -black construction paper
-utility knife -flat surface
-ruler -35mm film or dark room paper
-marker -scissors
-masking tape -3 1/2" sq. piece of cardboard

Step 1:
Empty out the container in which you will be making the camera. For the sake of this demonstration we will be using a Pringles can, so wipe it well so it is free of any debris.

Step 2:
With your ruler, measure down approx. 2” from the bottom of the can, (the metal end). Mark this with your ruler all the way around the can so that you will have a straight line to use as a cutting guide.